Go ahead,
coat everything
Our PCBA coatings already protect over 20 million vehicles every year worldwide. With widespread adoption of electronics across industries, the application possibilities are endless.
Advanced nanoGUARD™
PFAS-Free · Gel State · Hydrophobic · Elastoviscoplastic
There are many impressive words you could use to describe our groundbreaking technology.
Our Advanced nanoGUARD™ coating provides a shield that protects 100% of the board without sacrificing electrical performance.
Yes, even antennas, processors, and connectors.
Traditional Conformal Coatings
- Masking and keep-out areas required.
- Incomplete protection, higher scrap & quality issues.
- Adds labor, time and costs
Advanced nanoGUARD Coatings
- No masking or keep-out areas for connectors, grounding, antennas, etc.
- 100% 3D coverage, higher reliability & protection.
- Reduces labor, time and costs
We're also better than “nanocoatings”
Traditional conformal coatings often exceed 100 μm (micrometers), blocking signals and trapping heat. True nanocoatings are very thin, measured in nm (nanometers), can be fragile and require special equipment. actnano’s Advanced nanoGUARD™ coatings sit comfortably in the middle sweet spot — molecularly smart, but thick enough to actually protect your hardware while staying thin enough to make magic happen.
Our Product Offerings
Material & Compliance
Product lines available in silicone, silicone-free, and low-VOC formulations to meet diverse manufacturing and regulatory requirements.
Harsh Environment Protection
Coatings engineered to shield electronics against heavy moisture, salt spray, and harshly polluted or corrosive industrial environments.
High-Voltage & Safety-Critical Solutions
Offerings optimized for high-power electronics, EV applications, and fail-safe autonomous systems.
Specialized Engineering Solutions
Applications including protection from conductive Thermal Interface Materials including liquid metal, shielding against liquid-coolant leaks, gap sealants, dry lubricants, and anti-stiction coatings.
See it, believe it. No masking needed.
That 100% coverage even allows connect-through, undercoating, and rework in ways previously unimaginable
Connect Through
Our coatings’ mechanical properties allow it to deform for seamless connect-through on a variety of connector types.
Undercoating
It’s all about engineering the flow properties again, this time through the capillary effect. Our coatings provide under-component protection without adding mechanical stress.
Rework
Rework makes the dream work. Our coatings can be easily spot-removed with a bit of solvent. Compare that with traditional conformal coatings, which require harsh solvents or cannot be removed at all.
No Masking
It sounds too good to be true, but our gel-state coating does not require masking or keep-out areas for connectors, grounding, antennas, or other components. So go ahead, coat everything.
100% 3D Coverage
With sidewall coverage, capillary action for under components, and connector coverage that works like magic, we coat everything.
No Ovens Required
After application, our coatings don’t need heat or curing ovens: they simply air-dry at room temperature.
Corrosion Protection
Liquids, condensation, humidity, salt fog, and other corrosive agents don’t stand a chance against our technology.
Thermally Compatible
Our thermal barrier is minimal, ensuring our coating is compatible with your components, no matter the operating temperature.
No Signal Attenuation
Signals receive and leave without issue across your components, no questions asked.
Standard Dispensing Equipment
Drop us in and let it rip – we’re a drop-in solution with equipment you already have.
Enterprise Scale
Designed for high-volume manufacturing lines. We integrate directly into your existing assembly process for seamless scalability.
Safer to Use
Sustainably minded by designed and safer to use – conformal coatings of the past just can’t compare.
Eliminate expensive masking and time-consuming curing processes with actnano's revolutionary coating technology. Experience complete 3D component protection at the lowest overall cost.
Your Factory's Best Friend
actnano coatings work as a drop-in solution for standard application equipment for both needle dispensing and atomized spray. After application, our coatings don’t even need heat or curing ovens: they simply air-dry at room temperature in around 30 seconds. CapEx is reduced and floor space is saved with actnano.
STATUS: ACTIVE
Automated Precision Application
Standard Coating Application
Not-So-Standard Dry Time
Above Average Support
Did we tell you We Do The Work?
Many of our customers have told us, “You’re doing my job for me …I really like it.”
When you work with us, you get more than just our revolutionary material. We do the work to ensure your success, from evaluation and protection strategy to testing and validation all the way to factory implementation.
We design the perfect coating profile, coat samples for free at our facilities or yours, and work with your manufacturers to implement. And we don’t leave until everything is running smoothly.